The Log Home Neighborhood

An online log home community for log home enthusiasts.

Log Home Update: What to Do When You Installing a New Water Heater

Installing a new water heater doesn’t have to be complicated if you follow a step by step approach. The first place to start is determining the size and type of water heater that you want to install into your home. Here is an overview of the steps that you’ll need to take when installing your new water heater.

Drain Your Lines

Draining your water lines and the old water heater tank is the first place to start with the process. Hook up a garden hose to the spigot at the bottom of the tank so that you can drain it more efficiently. If this option isn’t available, the more time consuming method is to use the relief valve and drain it into a bucket. Make sure that you shut off the water lines so that the tank isn’t trying to refill at the same time. You’ll also need to shut off the energy source to ensure your safety.

Remove the Old One

Once you’ve drained the water and severed the water line connections, you can remove your old water heater. Use a hand truck or some other means of moving the water heater so that you aren’t struggling with it. Another thing that you’ll want to consider is what to do with the water heater once it’s out of the way. Use a junk removal company to pick up your old water heater. Some companies, such as Pro Junk Dispatch, know that this will eliminate the need for you to haul it to the curb or the dump yourself.

Consider Quick Release Options

Look into other options when it comes to plumbing in your new water heater. Quick release options may assist you with the replumbing process. Another thing to consider is installing shutoff valves directly above your new water heater. If you consider the average life span of a water heater, you want to make it easier for the next time that you need to complete this task.

Establish Your Connections

Screw on connections are easier to make then hard plumbing into your water heater. Position your water heater underneath your water lines and get everything set into place. Another thing that you may want to consider is adding earthquake strapping. This could help to keep your water heater secured in such a way as to prevent accidental tipping or other issues. Double check your water and energy source connections and try out your new water heater.

Taking a step by step approach will make the project easier. Use these tips so that you can get the job done right when it comes to installing your new water heater.

Views: 40


You need to be a member of The Log Home Neighborhood to add comments!

Join The Log Home Neighborhood

© 2020   Created by Neighborhood Host.   Powered by

Guide to Log Homes | Advertise | Badges  |  Report an Issue  |  Terms of Service